Why Does Asking Only for an EMD Price Produce an Unusable Quote?
A price-only email gives a supplier nothing to price. EMD reaches battery, pigment, ceramic, catalyst and pharmaceutical buyers under one product name, and technical specifications always include MnO2 content, Particle Size, packing specifications, etc. Name none of it and the reply is a range, a figure built on the supplier's defaults, or silence. Seven details decide whether the number can be approved, compared and executed: application, battery type, specification, packaging, quantity, destination and verification status.
Three shapes of unusable reply
A one-line request returns three possible answers, none usable in a purchase order.
A range. Two figures with no stated basis, the gap usually hiding a grade question. Nobody can approve it.
A single figure. The common case, and the most misleading. Every field you left empty was filled with a default: the published grade, the standard bag, the minimum order, no freight. Two suppliers returning single figures are quoting two different default sets, so you are not comparing price.
A request for more information. The honest reply, and the slowest, costing a week of messages when the questions arrive one at a time.
The defaults are not dishonest, since a supplier must put something in each blank. You simply did not choose them, and grade, packing and freight are where the cost drivers behind an EMD price sit.
The seven fields and what each one unlocks
| Field | What the supplier invents when it is missing | What a complete answer gives you |
|---|---|---|
| Application | Which sector the material serves | The grade route and its documents |
| Battery type | The chemistry behind battery | A grade, a recipe, an acceptance test |
| Specification | The published table, unchanged | Your limits, with methods and tolerances |
| Packaging | Lined 40 kg bags | A price tied to a packing cost you can change |
| Quantity | The minimum order | A unit price at your volume |
| Destination | No freight, or a guessed port | A delivered cost on a stated term |
| Verification status | That this is a first inquiry | An indicative figure or a firm offer, labelled |
Application first, battery type second
EMD is not single-use. Battery, pigment, ceramic, catalyst and pharmaceutical routes draw on one product family without stressing the same limits, so a glaze formulator and an alkaline cell builder need different answers from an identical requisition.
Inside batteries, chemistry beats the label. Carbon-zinc, alkaline, button and primary lithium cells differ in electrolyte, cathode density and discharge protocol, and one content minimum separates none of them. An application with no specification buys a fast proposal and hands the grade choice away; a named chemistry and test buy a narrower quote. The battery application area shows why a request for manganese for batteries can land on the sulfate or carbonate desk instead.
Specification is a window, and every tightening costs yield
The Qingchong EMD technical properties set MnO2 at 91% minimum, 91–92% typical, pH 5–7.5, iron at 200 ppm maximum, moisture at 3% maximum and a 100–400 mesh particle band. Those are screening values for a wide supply base, not a fit claim for your line.
A band that wide is deliberate, because one grade serves several processes. Asking for a narrower cut, a lower moisture ceiling or a tighter iron limit buys a selection inside the band, and a selection costs yield, so expect a higher price. Two habits keep the request quotable: say whether moisture is measured dry or as-shipped, and name the test method behind each limit.
Packaging and quantity move the unit price more than buyers expect
QingChong packs the powder in lined woven bags of 25 kg or 40 kg. Larger formats are a question to confirm, not a format to assume; the same page covers packing, sample and order terms.
One tonne, the minimum for most products, is 40 bags at 25 kg or 25 at 40 kg. That count drives pallets, container fill, warehouse labour and how the powder is charged, so a per-tonne price on 40 kg bags is not the same operating cost as the same figure on 25 kg.
A larger format removes packing cost per tonne and needs lifting gear and a hopper, while smaller bags suit a manual charge and cost more in handling.
For volume, give an average month and a peak month, not one annual tonnage. Fewer, larger lots lower the unit price and raise exposure, because one failed lot fails at scale.
Destination decides whether the number is a delivered cost
Name the destination port or city and the Incoterm, then ask for material price and freight as separate lines, so a freight move does not restart the comparison. Ask which HS heading the invoice will carry, and check it with your broker before the first shipment.
Verification status tells the supplier which quote to write
No sample tested yet. Ask for an indicative price, labelled as indicative, with a stated validity. Holding a supplier to a firm number at this stage invites a risk premium.
Sample tested in your own lab. Send the protocol and the result, then ask for an offer tied to that test and stating which production route the bulk will follow. This is where a lab pass and a bulk trial part company.
Bulk trial completed. Ask for lot commitment, change-control notice and the conditions that force a re-quote. A firm price without them will move without warning.
Check the reply against six lines before you compare
- Price basis: per tonne or per bag, and on which packing format.
- Grade and limits: your specification or the published table, with methods.
- Trade term: Incoterm, named place, and what the figure excludes.
- Currency, validity date, and the triggers that force a re-quote.
- Documents per lot: certificate of analysis, technical and safety data sheets.
- Assumptions: same route as the sample, lead-time start, payment terms, labelling.
Sort what arrives into comparable and indicative, then stop averaging across the two.
A one-page inquiry you can paste
- Application, and the cell chemistry if the material goes into batteries.
- Limits you already control, with test methods.
- Packing format and any labelling requirement.
- Average month, peak month, and the lot size you can consume.
- Destination port or city, and preferred Incoterm.
- Validation stage, and the date your decision is due.
- Whether you want a sample, an indicative figure, or a firm offer.
For a cell programme that needs the longer version, the seven-input purchase dossier extends the list into model, market, formulation, test method and validation gates.
Quote inputs
Send one page and get a quote you can approve
Put application, chemistry, limits, packing, volume, destination and validation stage in one message. The reply can then carry a price basis, a validity date and a document list instead of a range.
Or call +86-731-52326088
FAQ
Can I get a price before packaging and destination are fixed?
Yes, as an indicative figure on a stated basis: one packing format, one trade term, one validity. That is enough to budget against without pretending it is a delivered cost. The firm quote follows once pack size and port are named.
Why do two suppliers quote different prices for the same 91% EMD?
A minimum content figure can be met by material sitting anywhere inside a 100–400 mesh band, and offers may also differ on packing, trade term, currency and validity. Compare the six basis lines first; where they do not match, the gap is not a price difference.
What should I request before a bulk quote?
A sample of 500 g to 1 kg, supplied free with freight on your account, plus a certificate of analysis with test methods. Confirm in writing that bulk follows the same production route, and that the pack size you trial is the pack size you buy.

CN
fr
es
ar
ru
de
pt
tr
vi
it
ja
ko
hi


